| Name ___________________ # _____ |
Section ________ |
| St. Mary's Physics |
Date __________ |
|
Analyzing Circuits |
1. In the circuit diagram shown below, ammeter A1
reads 10. amperes.

a) the current in ammeter A2 (hint -
find RT, then VT , then I1) |
b) Total resistance =
c) potential difference of the source? |
|
2. A 20.0-volt battery is connected to a
5.0-ohm
resistor and a 15.0-ohm resistor as shown in the diagram below.

|
a)
What is the current in the 15.0-ohm resistor?
b)
What is the current in the 5.0-ohm resistor?
|
Analyzing Circuits
|
3. The diagram below represents an electric
circuit consisting of a 12-volt battery, a 3.0-ohm resistor, R1 , and a
variable resistor, R2 .

|
a) At what value must the variable resistor be set
to produce a current of 1.0 ampere through R1 ? |
|
4. Base your answers to questions a
through c on the information and diagram below. A 20.-ohm resistor and a
30.-ohm resistor are connected in parallel to a 12-volt battery as shown.
An ammeter is connected as shown.

|
a) What is the equivalent resistance of
the circuit?
b) What is the current reading of the
ammeter?
c) What is the power of the 30.-ohm
resistor?
|
Analyzing Circuits
|
5. Base your answers to questions a
through d on the circuit diagram below.

a) If switch S1 is open, the reading of
ammeter A is
|
b) If switch S1 is closed, the equivalent resistance of the circuit is
c) find the potential difference across the first resistor
d) find the potential difference across the second resistor
|
|
6. The diagram below shows a circuit with two
resistors.

a) What is the reading on ammeter A?
b) find the potential difference across the first and second
resistor
V1 =
V2 =
|
Analyzing Circuits
|
7.
a) What is the total resistance of the circuit?
|
b) What is the total current in this circuit?
c) What is the potential difference across the first resistor?
d) What is the potential difference across the
second resistor?
|
|
The diagram below shows a circuit with three
resistors.

a)
What is the resistance of resistor R3?
|
b) What
is the total resistance of the circuit?
c) What is the potential difference across the
first resistor?
d) What is the potential difference across the
second resistor?
|
|